129Wireless networkThe camera connects to a smart phone that supports the MobileLinkfeature via a WLAN. You can easily send photos or videos to your smartphone.• The MobileLink feature is supported by Galaxy series smart phones or GalaxyTab models with the Android 2.3 OS or higher or iOS devices with the iOS 6.0or higher. Before using this feature, check the device’s firmware and update itif needed.• You should install Samsung SMART CAMERA App on your phone or devicebefore using this feature. You can download the application from SamsungApps, the Google Play Store, or the Apple App Store. Samsung SMARTCAMERA App is compatible with Samsung camera models manufactured in2013 or later.• To install and launch Samsung SMART CAMERA App on an NFC-enabledsmart phone, turn on the NFC feature and place the smart phone near an NFCtag (p. 30) on the camera. This feature is supported by smart phones runningAndroid OS 2.3 or higher. This feature is not available for iOS devices.• When there are no files in the camera memory, you cannot use this feature.• If you select files from the smart phone, you can view up to 1,000 recent filesand send up to 150 files at a time. If you select files from the camera, you canview files that were selected from the camera. The maximum number of filesthat can be sent varies depending on the storage space of the smart phone.• When you send Full HD videos using MobileLink feature, you may not be ableto play back files on some devices.• When using this feature on an iOS device, the device may lose its Wi-Ficonnection.• You cannot send RAW files.1 On the camera, rotate the mode dial to B.2 On the camera, select .• If the pop-up message that prompts you to download theapplication appears, select Next.3 On the camera, select a sending option.• If you select Select Files from Smartphone, you can use yoursmart phone to view and share files stored on the camera.• If you select Select Files from Camera, you can select files to sendfrom the camera.4 On the smart phone, turn on Samsung SMART CAMERA App.• For iOS devices, turn on the Wi-Fi feature before turning on theapplication.• To start the application automatically on an NFC-enabled smartphone, turn on the function and place the smart phone nearthe NFC tag (p. 30) on the camera. Verify that the smart phone isconnected to your camera, and then skip to step 7.Sending photos or videos to a smart phone
