131Wireless networkThe camera connects to a smart phone that supports the RemoteViewfinder feature via a WLAN. Use the smart phone as a remote shutterrelease with the Remote Viewfinder feature. The captured photo willdisplay on the smart phone.• The Remote Viewfinder feature is supported by Galaxy series smart phones orGalaxy Tab models with the Android 2.3 OS or higher or iOS devices with theiOS 6.0 or higher. Before using this feature, check the device’s firmware andupdate it if needed.• You should install Samsung SMART CAMERA App on your phone or devicebefore using this feature. You can download the application from SamsungApps, the Google Play Store, or the Apple App Store. Samsung SMARTCAMERA App is compatible with Samsung camera models manufactured in2013 or later.• To install and launch Samsung SMART CAMERA App on an NFC-enabledsmart phone, turn on the NFC feature and place the smart phone near an NFCtag (p. 30) on the camera. This feature is supported by smart phones runningAndroid OS 2.3 or higher. This feature is not available for iOS devices.• This function is not available in 3D mode.1 On the camera, rotate the mode dial to B.2 On the camera, select .• If the pop-up message that prompts you to download theapplication appears, select Next.3 On the smart phone, turn on Samsung SMART CAMERA App.• For iOS devices, turn on the Wi-Fi feature before turning on theapplication.• To start the application automatically on an NFC-enabled smartphone, turn on the function and place the smart phone nearthe NFC tag (p. 30) on the camera. Verify that the smart phone isconnected to your camera, and then skip to step 6.4 Select the camera from the list and connect the smart phoneto the camera.• The smart phone can connect to only one camera at a time.Using a smart phone as a remote shutter release
