124Wireless networkConnecting to a WLAN and configuring network settingsLearn to connect via an access point (AP) when you are in a range of aWLAN. You can also configure network settings.Connecting to a WLAN1 Rotate the mode dial to B.2 Select , , , or .3 Press [m], and then select Wi-Fi Setting. In some modes, follow the on-screen instructions until the Wi-FiSetting screen appears. The camera automatically searches for available AP devices.4 Select an AP.BackRefreshSamsung1Samsung2Samsung3Samsung4 Select Refresh to refresh connectable APs. Select Add wireless network to add an AP manually. Your AP namemust be in English to add the AP manually.Icon/Option DescriptionAd hoc APSecured APWPS APSignal strengthPress [F] or touch to open network setting options. When you select a secured AP, a pop-up window appears. Enter therequired passwords to connect to the WLAN. For information aboutentering text, refer to "Entering text". (p. 128) When a login page appears, refer to "Using the login browser".(p. 126) When you select an unsecured AP, the camera will connect to theWLAN. If you select a WPS profile supported AP, select ĺ WPS PINconnection, and then enter a PIN on the AP device. You can alsoconnect to a WPS profile supported AP by selecting ĺ WPSbutton connection on the camera, and then pushing the WPSbutton on the AP device. The same AP may be listed twice, with different frequencies,because your camera supports the dual band function.
