134Wireless networkUsing Auto Backup to send photos or videosYou can send photos or videos that you captured with the camera to a PCwirelessly.Installing the program for Auto Backup onyour PC1 Install i-Launcher on the PC. (p. 164)2 Connect the camera to the PC with the USB cable.3 When the Auto Backup program icon appears, click it. The Auto Backup program is installed on the PC and theinformation about the PC will be stored to the camera. Follow theon-screen instructions to complete the installation. You can also save the information about the PC to the camera byconnecting the PC and the camera via Wi-Fi.4 Remove the USB cable.Before installing the program, ensure that the PC is connected to a network.If no internet connection is available, you must install the program from theprovided CD.Sending photos or videos to a PC1 Rotate the mode dial to B.2 Select . If the the pop-up message that prompts you to download theapplication appears, select Next. You must configure the backup PC information to use the AutoBackup feature. For more details, refer to "Installing the programfor Auto Backup on your PC". (p. 134) If the Auto Backup program isinstalled on your PC, save the PC information via USB cable or Wi-Ficonnection. The camera will automatically attempt to connect to a WLAN viathe most recently connected AP device. If the camera has not previously been connected to a WLAN, it willsearch for available AP devices. (p. 124)
