129Wireless networkSaving files to a smart phone automaticallyThe camera connects to a smart phone that supports the AutoSharefeature via a WLAN. When you capture a photo with your camera, thephoto is saved to the smart phone automatically. The AutoShare feature is supported by Galaxy series smart phones or GalaxyTab models with the Android 2.3 OS or higher or iOS devices with the iOS 6.0or higher. Before using this feature, check the device’s firmware and update itif needed. You should install Samsung SMART CAMERA App on your phone or devicebefore using this feature. You can download the application from SamsungApps, the Google Play Store, or the Apple App Store. Samsung SMARTCAMERA App is compatible with Samsung camera models manufactured in2013 or later. To install and launch Samsung SMART CAMERA App on an NFC-enabledsmart phone, turn on the NFC feature and place the smart phone near an NFCtag (p. 31) on the camera. This feature is supported by smart phones runningAndroid OS 2.3 or higher. This feature is not available for iOS devices. You must insert a memory card to use this feature. If you set this function, the setting is maintained even when you change theShooting mode. This feature may not be supported in some modes or may not be availablewith some shooting options.1 On the camera, in Shooting mode, press [m].2 On the camera, select 1 ĺ AutoShare ĺ On. If the pop-up message that prompts you to download theapplication appears, select Next.3 On the smart phone, turn on Samsung SMART CAMERA App. For iOS devices, turn on the Wi-Fi feature before turning on theapplication. To start the application automatically on an NFC-enabled smartphone, turn on the function and place the smart phone nearthe NFC tag (p. 31) on the camera. Verify that the smart phone isconnected to your camera, and then skip to step 6.4 Select the camera from the list and connect the smart phoneto the camera. The smart phone can connect to only one camera at a time.5 On the camera, allow the smart phone to connect to yourcamera. If the smart phone has been connected to your camera before, it isconnected automatically. An icon that shows the connection status ( ) will appear on thecamera’s screen.6 On the camera, capture a photo. The captured photo is saved to the camera, and then transferred tothe smart phone. If you recorded a video, it is saved only to the camera.
