CHAPTER 5. Maintenance OfficeServ 500 Wireless LAN Service Manual/Ed.00Page 5-14 © SAMSUNG Electronics Co., Ltd.5) When the upgrade is completed, the following screen will show up. The upgradecontents are not applied at this time, and it is applied when restarting theWBS24. If the upgrade contents are needed to apply immediately, click the[Restart] button and restart the WBS24. After restarting, verify the version onthe web screen.Figure 5.13 Web screen for upgrading the WBS24 S/W (Firmware Upgrade Complete)6) When several units of WBS24 are installed, repeat No.1~No.5 by moving the PCto each WBS24.2.1.2 Wired ConnectionPreparing Materialsy PC(PC or laptop computer) that is loaded with the wire LAN port.y Upgrade file for HTTP(tar type)Upgrade Procedure1) After connecting the PC to the wired LAN, connect to the IP address of WBS24.Bring up the web browser. The IP address of the WBS24 is established at thesystem, and the established value can be inquired via the MMC 845. Verify if theDASL status is ‘Active(Config OK)’ on the web screen. If the status is not‘Active(Config OK)’, reload the screen and wait for the status.
