OfficeServ 500 Wireless LAN Service Manual/Ed.00 CHAPTER 5. Maintenance© SAMSUNG Electronics Co., Ltd. Page 5-193.2 Configuring the Console TerminalThe values of the console terminal to be used are configured as shown below.y Emulation : compatible with VT-100/ANSIy Bits per second : 9600 bpsy Stop bit : 1y Data bit : 8y Parity bit : Noney Flow control : NoneThe method of setting the console terminal can be different according to the terminaltype or the management system. The file(WLIROM.HEX, MWLIROM.HEX) isloaded to the 8WLI card in the following two methods.y Using the Tera terminal of the Windows 95/98 operating systemy Using the ‘qmodem.exe’ on the DOS window3.2.1 Loading a File with the Tera Terminal1) Turn on the PC(Windows95/98 O/S).2) Execute the Tera terminal program3) If console terminal is not connected, ‘Cannot open COM1’ message windowsappears. Then, Click the Æ to open the new window.4) Select the Æ from the new window, and set as shownbelow then click the [Ok] button.y Bits per second : 9600 bpsy Stop bit : 1y Data bit : 8y Parity bit : Noney Flow control : None5) Then a new Tera terminal will show up.
