341 If the television is in Standby mode, press the POWERbutton on the remote control.The message Start Plug & Play is displayed.Press the ENTER button to select OK.The Language menu is displayed.2 Select the appropriate language by pressing the or button.Press the ENTER button to confirm your choice.The message Check antenna input is displayed.3 Press the ENTER button to select OK.The menu to select signal source is displayed.4 Select the correct signal source (Air, STD, HRC and IRC)by pressing the or button, then press theENTER button.Plug & Play FeatureWhen the TV is initially powered On, basic customer settings proceed automatically andsubsequently: Setting the language, checking the antenna input, memorizing thechannels, and setting the time.Note• The Plug & Play function operates after plugging in the TV for the first time.Start Plug & PlayPlug & PlayEnter ExitOKLanguagePlug & PlayCheck antenna input.Plug & PlayEnter SkipOKEnter SkipMoveEnglishFrançaisEspañolPortuguêsAir/CablePlug & PlayEnter SkipMoveAirSTDHRCIRCNote• The Language menu will automatically appearafter several seconds, even if the ENTER button isnot pressed.Note• The message Check antenna input willautomatically appear after several seconds, evenif the ENTER button is not pressed.
