Samsung PL-42P5H Owner's Instructions Manual

Contents

37Memorizing the ChannelsYour TV can memorize and store all of the available channels for both “off-air” (antenna) and cablechannels. After the available channels are memorized, use the CH and CH buttons to scanthrough the channels. This eliminates the need to change channels by entering the channel digits.There are three steps for memorizing channels: selecting a broadcast source, memorizing thechannels (automatic) and adding and deleting channels (manual).Selecting a broadcast sourceBefore your television can begin memorizing the available channels, you must specify the type of signalsource that is connected to the TV (i.e., an antenna or a cable system).1 Press the MENU button. Press the or button to select“Channel”, then press the ENTER button.2 Press the ENTER button to select “Air/Cable”.3 Press the or button to select “Air”, “STD”, “HRC”or “IRC”, then press the ENTER button.• If you are connected to an antenna, leave “Air”displayed. If you connected cable, press the or button to display the type of cable system: “STD”,“HRC” or “IRC”.(If you are not sure which type of cable system youhave, contact your cable company).4 Press the EXIT button to exit.Note• STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company toidentify the type of cable system that exists in your particular area. At this point the signal sourcehas been selected. Proceed to “Storing Channels in Memory” (Next page).Air/Cable : Air √Auto Program √Add/Delete √Fine Tune √LNA : Off √ChannelT VMove Enter ReturnAir/Cable : AirAuto ProgramAdd/DeleteFine TuneLNA : OffChannelT VMove Enter ReturnAirSTDHRCIRCAir/Cable : AirAuto ProgramAdd/DeleteFine TuneLNA : OffChannelT VMove Enter ReturnAirSTDHRCIRC