Samsung PL-42P5H Owner's Instructions Manual

Contents

41Setting Up Your Remote ControlYour TV comes equipped with a universal remote control. In addition to controlling the TV, the universalremote control can also operate a VCR, Cable box, DVD, and some Samsung Set-top boxes (even if yourVCR, Cable box and DVD are made by manufacturers other than Samsung).Note : The remote control might not be compatible with all DVD Players, VCRs, Cable boxes,and Set-Top Boxes.Setting Up the Remote to Operate Your VCR, Cable box or DVD player1 Turn off your VCR (or Cable box, DVD player).2 Press the MODE button. The Mode is changed wheneverMODE button is pressed.3 Press the SET button on your TV's remote control.4 Using the number buttons on your remote control, enterthree digits of the VCR (or Cable box, DVD player) codelisted on page 42 of this manual for your brand of VCR (orCable box, DVD). Make sure you enter three digits of thecode, even if the first digit is a “0”. (If more than one codeis listed, try the first one.)5 Press the POWER button on the remote control. Your VCR(or Cable box, DVD) should turn on if your remote is set upcorrectly. If your VCR (or Cable box, DVD) does not turn onafter setup, repeat steps 2, 3, and 4, but try one of theother codes listed for your brand of VCR (or Cable box,DVD). If no other codes are listed, try each code, 000through 089 (or Cable box: 000 through 077, DVD player:000 through 008).Note• When your remote control is in “VCR”, “CABLE”, or “DVD” mode, the VCR control buttons (STOP,REW, PLAY/PAUSE, and FF) still operate your VCR.