Samsung PL-42P5H Owner's Instructions Manual

Contents

78How to Set up Your PC Software (Windows only)The Windows display-settings for a typical computer are shown below. But the actual screens on yourPC will probably be different, depending upon your particular version of Windows and your particularvideo card. But even if your actual screens look different, the same, basic set-up information will applyin almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)1. Right click the mouse on the WindowsDesktop, then click on Properties.The Display Dialog-Box will be displayed.2. Click on Settings, then set the Display Modewith reference to the Display Modes Table.You do not need to change the Colors settings.3. Click on Advanced. A new settings dialog boxwill be displayed.4. Click on the Monitor tab, then set theScreen Refresh Rate with reference to theDisplay Modes Table. Set the VerticalFrequency and Horizontal Frequencyindividually if you can do so instead of settingthe Screen Refresh Rate.5. Press the OK button, close the window, thenpress the OK button on the Display RegistrationInformation window. Automatic re-booting maycommence at this moment.6. Shutdown the PC, and connect it to your TV.(See page 76)• The actual screens on your PC may lookdifferent, depending on your particularversion of Windows and the type of your PC.• When you use your TV as a PC monitor, itsupports Colors up to 32 bits.• In this case, the display on the TV may lookdifferent depending on your particular versionof Windows or the PC manufacturer.• When connecting a PC you must set it to thedisplay settings that are supported by the TV.Otherwise, the message Out of inputrange will be displayed.Continued...2345