Samsung PPM 42S3 Owner's Instructions Manual

Also see for PPM 50H3: Install guide Specifications Owner's instructions Service manual

Contents

21When you start using your PDP for the first time, you must select thelanguage which will be used for displaying menus and indications.1 Press the MENU button.Result: The main menu is displayed.2 Press the ▲ or ▼ button to select Function.Result: The options available in the Function group aredisplayed.3 Press the √ button.Result: The Language option is selected.4 Press the √ button again.Result: The languages available are listed.5 Select the appropriate language by pressing the ▲ or ▼ buttonrepeatedly.6 Press the button to confirm your choice.Choosing Your LanguageENGThe mains lead is attached to the rear of your PDP.☛ If you have purchased this PDP in the United Kingdom,refer to page 9 for further instructions on plug wiring.1 Plug the mains lead into an appropriate socket.Result: The Standby indicator on the front of the PDP lights up.➢ The main voltage is indicated on the rear of the PDP andthe frequency is 50 or 60Hz.2 Press the “ I / ” button on the front of the PDP (or ON ( )button on the remote control) to switch the PDP on.3 To switch your PDP off, press the “ I / ” button again (or OFFbutton on the remote control).Front of the PDPSwitching On and OffEnglishFrançaisDeutschItalianoEspañolLanguageSel. StoreLanguage EnglishTime √√Selectable Fan œœ Off √√Film Mode œœ Off √√FunctionMove Enter ReturnBN68-00457B-01_ENG 2003.10.23 3:21 PM Page 21