Samsung PPM 42S3 Owner's Instructions Manual

Also see for PPM 50H3: Install guide Specifications Owner's instructions Service manual

Contents

37ENGYou can use the Fan if you are anxious for the PDP.1 Press the MENU button.Result: The main menu is displayed.2 Press the ▲ or ▼ button to select Function.Result: The options available in the Function group aredisplayed.3 Press the √ button.4 Press the ▲ or ▼ button to select Selectable Fan.5 Press the œ or √ button to change the setting (On or Off).➣ ◆ If your PDP is displayed vertically, the fanautomatically works.◆ The message Check Fan is displayed if there is a fanproblem.◆ Please use the fan when the temperature is over 35degrees.Turning On the FanLanguage EnglishTime √√Selectable Fan œœ Off √√Film Mode œœ Off √√FunctionMove Sel. ReturnWhen a video input source is from a film such as movies, this featureidentifies the source and changes to the corresponding screen.1 Press the MENU button.Result: The main menu is displayed.2 Press the ▲ or ▼ button to select Function.Result: The options available in the Function group aredisplayed.3 Press the √ button.4 Press the ▲ or ▼ button to select Film Mode.5 Press the œ or √ button to change the setting (On or Off).➣ ◆ If video source is not film, set to Off.◆ Available in Video, S-Video, and Component (480i)modes.Setting the Film ModeLanguage EnglishTime √√Selectable Fan œœ Off √√Film Mode œœ Off √√FunctionMove Sel. ReturnBN68-00457B-01_ENG 2003.10.23 3:21 PM Page 37