Samsung PPM 42S3 Owner's Instructions Manual

Also see for PPM 50H3: Install guide Specifications Owner's instructions Service manual

Contents

25ENGSizeWideœœ √√ Sel. StoreSelecting the Picture SizeYou can select the picture size which best corresponds to yourviewing requirements.1 Press the MENU button.Result: The options available in the Picture group aredisplayed.2 Press the √ button.3 Press the ▲ or ▼ button to select Size. Press the √ button.4 Select the option by pressing the œ or √ button.Result: The following modes are available depending on theinput source.◆ Wide - Zoom1 - Zoom2 - 14:9 - Normal◆ Wide - Panorama (Video or S-Video Mode) -Zoom1 - Zoom2 - 14:9 - Normal➣ The lifting is available in the Zoom1, Zoom2 or14:9 mode by pressing the † or … button.◆ Wide - Normal(PC or DVI Mode)➣ You can also set these options simply by pressing theP.SIZE button.Activating/Deactivating the Digital Noise Reduction FeatureIf the signal received by your PDP is weak, you can activate thisfeature to reduce any static and ghosting that may appear on thescreen.1 Press the MENU button.Result: The options available in the Picture group aredisplayed.2 Press the √ button.3 Press the ▲ or ▼ button to select Digital NR.4 Press the œ or √ button to change the setting (On or Off).Mode œœ Dynamic √√Adjust √√Color Tone œœ Normal √√Size WideDigital NR œœ Off √√PictureMove Sel. ReturnMode œœ Dynamic √√Adjust √√Color Tone œœ Normal √√Size WideDigital NR œœ Off √√PictureMove Sel. ReturnBN68-00457B-01_ENG 2003.10.23 3:21 PM Page 25