Samsung PPM 42S3 Owner's Instructions Manual

Also see for PPM 50H3: Install guide Specifications Owner's instructions Service manual

Contents

22ENGIf necessary, select the broadcasting standard which bestcorresponds to your viewing requirements.1 Press the MENU button.Result: The options available in the Picture group aredisplayed.2 Press the √ button.Result: The Color System is selected.3 Select a required color system by pressing the œ or √ button.Result: The following color systems are available.AUTO - PAL - SECAM - NTSC4.43 - NTSC3.58 -PAL M - PAL N - PAL60Selecting the Color System (Video or S-Video Mode)Color System œœ AUTO √√Mode œœ Dynamic √√Adjust √√Color Tone œœ Normal √√Size WideDigital NR œœ Off √√PictureMove Sel. ReturnYou can select the type of picture which best corresponds to yourviewing requirements.1 Press the MENU button.Result: The options available in the Picture group aredisplayed.2 Press the √ button.3 Press the ▲ or ▼ button to select Mode. Select the option bypressing the œ or √ button.Result: The following modes are available depending on theinput source.◆ Dynamic - Standard - Movie - Custom◆ Custom - High - Middle - Low(PC or DVI Mode)➣ You can also set these options simply by pressing theP.MODE (Picture Mode) button.Changing the Picture ModeMode œœ Dynamic √√Adjust √√Color Tone œœ Normal √√Size WideDigital NR œœ Off √√PictureMove Sel. Return➢ Preset to the Video or S-Video mode by using the SOURCE button.BN68-00457B-01_ENG 2003.10.23 3:21 PM Page 22