Samsung PS42B430 User Manual

Also see for PS42B430: User manual User manual

English - 30Preparing before installing Wall- Mount on the wall1. Install Wall Mount with the torque range of 15kgf·cm or less. Make sure that parts can be damaged if the torque is out of thespecified range.2. Accessory Kit contains Holder–Ring [①] for installing other company’s Wall-Mount on Samsung TV. (Case B)Screw down the hole [N ①] when installing wall-mount on the wall.Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hangover or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. Follow allsafety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safetypurposes, as follows.To avoid the TV from falling❑1. Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been firmly installed onto the wall.You may need additional material such as an anchor depending on the type of wall.NSince the necessary clamps, screws, and string are not supplied, please purchase these additionally.N2. Remove the screws from the center back of the TV, put the screws into the clamps, and then fasten the screws onto the TV again.Screws may not be supplied with the product.N3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and then tie the string tightly.Install the TV near to the wall so that it does not fall backwardsN .It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV.NUntie the string before moving the TV.N4. Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you have any doubtabout the security of your connections,contact a professional installer.경고 주의경고 주의Securing the TV to the WallWall WallCase A. Installing SAMSUNG Wall-Mount Case B. Installing other company’s Wall-Mount