Samsung Plasma TV User Manual
Also see for Plasma TV: User manualUser manualUser manualUser manualUser manual
                                                                 | |
Contents
|
English - 5Setting Up Anynet+The following settings are to use Anynet+ functions.Using the Anynet+ Function1 Press the MENU button to display the menu. Press the ▲ or ▼button to select Input, then press the ENTER button. Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC), thenpress the ENTER button. Press the ▲ or ▼ button to select Setup, then press the ENTERbutton.4 Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC), thenpress the ENTER button.5 Press the ▲ or ▼ button to select On, then press the ENTERbutton. The Anynet+ (HDMI-CEC) function is enabled. If you select Off, Anynet+ (HDMI-CEC) is disabled. When the Anynet+ (HDMI-CEC) function is disabled, all theAnynet+ related operations are deactivated.Turning an Anynet+ Device Off Automatically when the TV isTurned Off4 Press the ▲ or ▼ button to select Auto Turn Off, then press theENTER button.5 Press the ▲ or ▼ button to select Yes, then press theENTER button. The Auto Turn Off function is enabled. If you select No, the Auto Turn Off function is canceled.Press the EXIT button to exit. The Select Device setting of the TV remote control is to be set toTV to use the Anynet+ function. If you set Auto Turn Off to Yes, connected external devices arealso turned off when the TV is turned off. However, if the device isrecording, it may not be turned off.Easy Setting1 Press the TOOLS button on the remote control. Press the ENTER button to select Anynet+ (HDMI-CEC).Scanning and Switching between Anynet+ Devices1 Press the MENU button to display the menu. Press the ▲ or ▼button to select Input, then press the ENTER button. Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC), thenpress the ENTER button. Press the ▲ or ▼ button to select Select Device, then press theENTER button.4 Press the ▲ or ▼ button to select to a particular device and pressthe ENTER button. It is switched to the selected device.5 If you cannot find a device you want, press the ▲ or ▼ button toselect Searching Connections, then press the ENTER button.The meassage Configuring Anynet+ connection... is displayed.When searching devices completes, the connected devices arelisted in the Anynet+ menu. Switching to the selected devices may take up to 2 minutes. Youcannot cancel the operation during the switching operation. The time required to scan for devices is determined by the numberof connected devices. When the device scan is complete, the number of found devices isnot displayed. Although the TV automatically scans devices when it is turned onusing the POWER button, devices connected when the TV is on or under a specific circumstance are notdisplayed in the device list. Therefore select Searching Connections menu to search devices. If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+function. Make sure to switch to an Anynet+ device by using the TOOLS button. Continued...SetupAnynet+ (HDMI-CEC) : OffAuto Turn Off : OffSearching ConnectionsEnter ReturnMoveOffOnEnterMoveView TVSelect Device Record Menu on Device Device Operation Receiver :Off Setup TV P 1ReturnEnterMoveView TVSelect Device Record Menu on Device Device Operation Receiver :Off Setup TV P 1ReturnDVDR1DVDRDVD1DVDSetupAnynet+ (HDMI-CEC) : OnAuto Turn Off : : OffSearching ConnectionsEnter ReturnMoveNoYesSetupAnynet+ (HDMI-CEC) : On Auto Turn Off : Yes Searching Connections Enter ReturnMoveToolsAnynet+ (HDMI-CEC)Picture Mode : EntertainmentSound Mode : EntertainmentSleep Timer : OffSRS TS XT : OffEnergy Saving : MediumDual I-II : MonoMove Enter Exit |
Related manuals for Samsung Plasma TV
manualsdatabase
Your AI-powered manual search engine