English - 5Auto Wall- mount adjustment (Sold separately)(PS50A5)Once the auto wall mount is installed, the position of your TV can be easily adjusted.Serial Cable(1P to 1P)(Not supplied)Rear Panel Auto Wall-MountEntering the menu1 Press the ▲, ▼, ◄ or ► button on your remote control. The Wall Mount Adjustment screen is displayed. If the Wall Mount Adjustment screen is not displayed whenclicking on a direction button while watching your TV, usethe menu to display that screen.• Press the MENU button to display the menu. Press the▲ or ▼ button to select Setup, then press the ENTERbutton.• Press the ▲ or ▼ button to select Auto Wall-Mount,then press the ENTER button.Remembering the Position Adjust to the desired position using the ▲, ▼, ◄, ► buttons. If you press an arrow button when no OSD is displayed onthe TV screen, the Adjustment screen appears. Press the INFO button to reset. Press the ◄ or ► buttonto select Yes, then press the ENTER button. The positionis initialized to the default setting. Press the blue button.Press the ▲ and ▼ buttons to select a save mode from eitherPosition1, Position or Position in order to save the currentposition. To not save the current position, press the RETURNbutton. When selecting a save mode, you cannot use the Colorbuttons.4 Press the ENTER button to save. When Position1 is selected, the message Currentposition saved as Position1 is displayed.5 Press the ENTER button. The saved Position appears on the left side of the OSD.Continued...Move Enter ReturnPlug & Play Language : English Time Auto Wall-Mount Melody : Off Entertainment : Off Energy Saving : Off PIP SetupT VSaveReturnMove EnterSelect a mode to Save.Position 1Position 2Position 3Auto Wall-MountPosition1Adjust SavePosition 1 ► ►► ► ► ►► ►INFO Center