English - 5Wall Mount Kit Specifications (VESA)Install your wall mount on a solid wall perpendicular to the floor.When attaching to other building materials, please contact your nearest dealer.If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.Product Family inch VESA Spec. (A * B) Standard Screw QuantityLCD-TV23 ~ 26 200 * 100 M4432 ~ 40 200 * 200 M646 ~ 52 400 * 400600 * 400M857 700 * 400(No VESA)57 ~ 70 800 * 40080 ~ 1400 * 800PDP-TV42 ~ 58 400 * 400600 * 400M8463 676 * 407(No VESA) 663 ~ 70 800 * 400 480 ~ 1400 * 800 4 We provided the standard dimensions for wall mount kits as shown in the table above. When purchasing our wall mount kit, a detailed installation manual and all parts necessary forassembly are provided. Do not use screws longer than the standard dimension, as they may cause damage to the inside ofthe TV set. For wall mounts that do not comply with the VESA standard screw specifications, the length of thescrews may differ depending on their specifications. Do not use screws that do not comply with the VESA standard screw specifications.Do not use fasten the screws too strongly, this may damage the product or cause the product to fall,leading to personal injury. Samsung is not liable for these kinds of accidents. Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wallmount is used or the consumer fails to follow the product installation instructions. Our 57” and 63” models do not comply with VESA Specifications. Therefore, you should use ourdedicated wall mount kit for this model. Do not exceed 15 degrees tilt when mounting this TV.Do not install your Wall Mount Kit while your TV is turned on.It may result in personal injury due to electric shock.