Samsung ProCpress M408 Series User Manual

Machine setup23812. Menu Overview and Advanced Features- On-Forced: Set the Eco mode on with password. If a user wantsto turn the Eco mode off, the user needs to enter the password.If you set this mode to off, the Eco mode print job from the driver will not becalculated as a Eco mode nor will the Eco mode LED on the control be on.• Eco Features Configuration: You can set the default options for Ecomode.- Factory Default: You can keep the default settings.- Custom Settings: You can set printing from copy and PC driverprint settings related settings. The settings you set here will beapplied to all copy print and PC driver print jobs sent to themachine, unless the user disables Eco mode.3 Press OK to save the change or (Back) to return to the previousscreen.Initial SettingsYou can change the initial settings when you first turn the machine on.1 Press Machine Setup > Initial Settings from the display screen.2 Press the language to use on the display screen and then press Next.3 Enter the password to use and then press Next. Re-enter the passwordto confirm it, then press Done > Next.4 Set the time on the machine. Then press Next.5 Remove the existing device name and enter the device name you wantto use and then press OK. Then press Next. If necessary, enter thelocation of the machine in the Location field. If necessary, enter theinformation in the Administrator field for the person to contact whenany problem occurs on the machine.6 When Connected appears after pressing the Test button, press Next.If Not connected appears, make sure that the machine is connected tothe network then verify the LAN connection again.If a network connection problem persists, contact your networkadministrator.7 Enter the IP address, subnet mask, and gateway in each field. Then press Next.• If a new IP address is assigned automatically by a DHCP or BOOTP, pressDHCP or BOOTP.• If you are not sure about your network environment, contact yournetwork administrator.8 Enter the Host Name, Domain Name, Primary DNS Server andSecondary DNS Server in each field. Then press Finish.9 The completed window appears. Press the Close button.If the engine is busy, the machine might take longer to reboot.