Samsung QN800C Series User Manual

ENG - 26• A Bluetooth device may experience noise or malfunction under in the following conditions:‒ When the body is in contact with the signal transceiver on the Bluetooth device or Soundbar‒ In corners or when there is an obstacle in proximity, such as a wall or partition, where electrical changes may occur.‒ When exposed to radio interferences by other products operating on the same frequency ranges, such as medical equipment, microwaveovens, and wireless LAN devices.‒ Obstacles such as doors and walls may still impact the sound quality even when the devices are within the effective range.• Note that your Soundbar cannot be paired with other Bluetooth devices while using the Bluetooth option.• This wireless device may cause electrical interference during operation.Disconnecting the Bluetooth device from a SoundbarYou can disconnect a Bluetooth device from the Soundbar. For instructions, see the Bluetooth device’s user manual.• The Soundbar will be disconnected.• When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display “BT DISCONNECTED” on the front display.Disconnecting the Soundbar from the Bluetooth devicePress the (Multi Function) button on the top of the Soundbar or the (Source) button on the remote control to switch the mode from “BT”.• Disconnecting takes time because the Bluetooth device must receive a response from the Soundbar. (Disconnection time may differ,depending on the Bluetooth device)• When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display “BT DISCONNECTED” on the front display.