Samsung QN800C Series User Manual

ENG - 317. Install the Soundbar with the attached Bracket-Wall Mounts byhanging the Bracket-Wall Mounts on the Holder-Screws on thewall.8. Slide the Soundbar down as shown below so that the Bracket-WallMounts rest securely on the Holder-Screws.• Insert the Holder-Screws into the wide (bottom) part of theBracket-Wall Mounts, and then slide the Bracket-Wall Mountsdown so that the Bracket-Wall Mounts rest securely on theHolder-Screws.Installing the Surround Speakers on aWallYou can purchase wall mounts separately to install the surroundspeakers on a wall.Wall mounts aren’t sold by Samsung Electronics.Notes for Wall Mounting the Surround Speakers• Surround Speaker wall mounts must be able to support more than17.6 lbs (8.0 kg).• Hole size : 1/4 - 20 UNC threaded insert‒ Standard Screw : 6.35 mm (0.25 Inch) ø,1.27mm (0.05 Inch) Pitch‒ Length : 18 mm (0.70 Inch) long‒ Quantity : Left 1 EA / Right 1 EAL R• Check the strength of the wall before you install the Wall MountBrackets. If the strength is insufficient, make sure to reinforce thewall before installing the Wall Mount Brackets and the speakerson the wall.• Samsung Electronics is not liable for any damage to the productdue to the product being installed inappropriately.• Take care not to install the speakers sideways or upside down.10 INSTALLING THESOUNDBAR IN FRONT OFTVComponentx 4Rubber-Foot (BN67-00398L)To install, attach the Rubber-Feet to the bottom of the Soundbarbefore placing it in position above the TV stand. Make sure you attachthe Rubber-Feet so they do not lie outside the edges of the TV stand.Refer to the figure below.Rubber-FootPlace the Soundbar on a TV stand.Microphones