ENG - 32As illustrated in the image, align the center of the Soundbar with thecenter of the TV, carefully place the Soundbar onto the TV stand.At this time, place the microphones at the front of the stand not tointerfere with voice recognition.Right end of SoundbarTVNOTE• Make sure the Soundbar is placed on a flat and solid surface.• Insufficient gap from the TV may cause voice recognition andacoustic problems.• The illustration above differs with the respective model.11 SOFTWARE UPDATEAuto UpdateWhen the Soundbar is connected to the Internet, software updatesautomatically occur even when the Soundbar is turned off.• To use the Auto Update function, the Soundbar must be connectedto the Internet.The Wi-Fi connection to the Soundbar will be terminated ifthe Soundbar’s power cord is disconnected or the power is cutoff. If the power is cut off, when the power comes back on oryou reconnect the power cord, turn on the Soundbar, and thenreconnect it to the Internet.USB UpdateBottom of the SoundbarSERVICEID SET(WOOFER, REAR)NETWORKSERVICEID SETSamsung may offer updates for the Soundbar’s system firmware inthe future.When an update is available, you can update the Soundbar byconnecting the USB drive that contains the update firmware to theSERVICE port of the Soundbar.1. Go to the Samsung Electronics website (www.samsung.com) →search for the model name from the customer support menuoption.• For more information about update, refer to Upgrade Guide.2. Download the upgrade file (USB type).3. Unzip the file to create a folder with the file name.4. Store the created folder in a USB and then connect it to theSoundbar.5. Turn on the Soundbar. Then the product is updated within 3minutes with displaying the message, “UPDATE”.• During update, do not turn it off or remove the USB.• If “UPDATE” does not appear on the display window, remove thepower cord from the Soundbar and then reconnect it.• When the latest version is installed, no update is performed.• Depending on the USB type, update may not be supported.