13. Installation3413-1. Indoor unit13-1. Indoor unitChoosing the installation locationOverview of installation location requirementsCAUTIONChecking and preparing accessories and toolsAccessoriesAccessories in the indoor unit packageAC७७७MNADCHInstallation plate (1)००ߣߢߡ००࣍ߢߡ˙θɇ͔ʪ࣎Installation plate (1)००ߩߢߡ००࣍ߥߡ˙θɇ͔ʪ࣎Installation plate (1)००ߥߣߡ००࣍ߦߡ˙θɇ͔ʪ࣎ŵʪ͔ͱϩʪʀͱ͝ϩθͱ̷࣍ߢ࣎ŵʪ͔ͱϩʪʀͱ͝ϩθͱ̷ɵɇϩϩʪθц࣍ߣ࣎ Ƹϑʪθđɇ͝Їɇ̷࣍ߢ࣎Ã͝ϑϩɇ̷̷ɇϩ̈ͱ͝đɇ͝Їɇ̷࣍ߢ࣎ AɇΧϑʀθʪи࣍ߤ࣎ŵʪ͔ͱϩʪAͱ͝ϩθͱ̷²ͱ̷ʒʪθ࣍ߢ࣎ ߧߢуߥđƟɇΧΧʪʒƊʀθʪиϑ࣍ߣ࣎Ї̈ʒʪøʪ˙ϩ࣍ߢ࣎ Ї̈ʒʪŵ̈˝˵ϩ࣍ߢ࣎13. Installation3.94 inch (100 mm) ormore (recommended)4.92 inch (125 mm) ormore (recommended) 4.92 inch (125 mm) ormore (recommended)Drain hose holeYou can select the direction of draining(left or right).Maximum pipe height: 26.25 ft (8 m)Maximum pipe length: 49.21 ft (15 m)Make at least one round toreduce noise and vibration.The actual units may look different fromthe images depicted here.Make a U-trap (A) on the pipe (which isconnected to the indoor unit) at outerwall and cut the bottom part of theinsulation [about 0.39 inch (10 mm)] toprevent rainwater from getting insidethrough the insulation.Outdoor UnitOuter wallIndoor UnitCut insulation to haverainwater drainedUnit : ft (m)đͱʒʪ̷ ť̈Χʪ̷ʪ͝˝ϩ˵ ť̈Χʪ˵ʪ̈˝˵ϩđ͔̈̈͝Ї͔ đɇӱ͔Ї͔ đɇӱ͔Ї͔AC018MNADCH 9.84 (3) 98.43 (30) 65.62 (20)AC024MNADCHAC030/036MNTDCH 9.84 (3) 164.04 (50) 98.43 (30)