Samsung RAC Series Technical Data Book

Also see for AC018MNADCH/AA: Installation manual Service manual

Contents

3513. Installation13-1. Indoor unitAC७७७MNTDCHInstallation plate (1)००ߧߤߡࢥߡߤߡ०० ŵʪ͔ͱϩʪʀͱ͝ϩθͱ̷࣍ߢ࣎ŵʪ͔ͱϩʪʀͱ͝ϩθͱ̷ɵɇϩϩʪθц࣍ߣ࣎ Ƹϑʪθđɇ͝Їɇ̷࣍ߢ࣎Ã͝ϑϩɇ̷̷ɇϩ̈ͱ͝đɇ͝Їɇ̷࣍ߢ࣎ ŵʪ͔ͱϩʪAͱ͝ϩθͱ̷²ͱ̷ʒʪθ࣍ߢ࣎ߧߢуߥđƟɇΧΧʪʒƊʀθʪиϑ࣍ߣ࣎Step 1.3 Drilling a hole through the wallBefore fixing the installation plate to a wall and then fixing the indoor unit tothe installation plate, a window frame, or a gypsum board, you must determinethe position of a hole [with 2.56 inch (65 mm) inner diameter] through whichthe pipe bundle (consisting of power and communication cables, refrigerantpipes, and drain hose) will pass and then drill that hole.1 Determine the position of a 2.56 inch (65 mm) hole in consideration ofthe possible directions of the pipe bundle and the minimum distancesbetween the hole and the installation plate.॑ťͱϑϑ̈ɵ̷ʪʒ̈θʪʀϩ̈ͱ͝ϑͱ˙ϩ˵ʪΧ̈ΧʪɵЇ͝ʒ̷ʪौLeft RightRear right or leftBottom rightCAUTION• If changing the pipe direction from left to right, do not drastically bent itbut slowly turn it in the opposite direction as shown. Otherwise, the pipemay be damaged in the process.Unit : inch (mm)đͱʒʪ̷ A B C DAC018MNADCH 1.42 (36) 7.48 (190) 3.19 (81) 1.42 (36)AC024MNADCH 1.30 (33) 4.33 (110) 4.33 (110) 1.30 (33)Pipe bundle hole: Ø 2.56 inch (65 mm)॑đ͔̈̈͝Ї͔ʒ̈ϑϩɇ͝ʀʪϑɵʪϩиʪʪ͝ϩ˵ʪ˵ͱ̷ʪɇ͝ʒϩ˵ʪ̈͝ϑϩɇ̷̷ɇϩ̈ͱ͝Χ̷ɇϩʪौBADCPipe bundle holeA CBDF EUnit : inch (mm)đͱʒʪ̷ A B C D E FAC030/036MNTDCH 6.14(156)2.64(67)14.33(364)1.36(34.5)2.54(64.5)0.77(19.5)Pipe bundle hole: Ø 2.56 inch (65 mm)॑đ͔̈̈͝Ї͔ʒ̈ϑϩɇ͝ʀʪϑɵʪϩиʪʪ͝ϩ˵ʪ˵ͱ̷ʪɇ͝ʒϩ˵ʪ̈͝ϑϩɇ̷̷ɇϩ̈ͱ͝Χ̷ɇϩʪौPipe bundle hole2 Drill the hole.CAUTION• Be sure to drill only one hole.• Make sure that the hole slants downwards so that the drain hose slantsdownwards to drain water well.WallDrain hoseIndoor unit॑Ɵ˵ʪ˵ͱ̷ʪϑ̷ɇ͝ϩϑʒͱи͝иɇθʒϑौ