Samsung RSG309 series User Manual

Also see for RSG309 SERIES: Quick start guide User manual User manual User manual

English - 1301 SETTING UPConnecting to the water supply line1. First, shut off the main water supply line andturn the ice-maker off.2. Locate the nearest cold, drinking water line.3. After connecting the water supply with waterfilter, turn on water supply and Flush 3 gallonsthrough filter before use (flush approximately 6minutes).Water line installation kitCold water linePipe clampShut off valveINSTALLING THE WATER LINEConnecting the water line to theRefrigerator.There are several items that you need to purchaseto complete this connection.You may find these items sold as a kit at your localhardware store.• ¼” compression nut• copper tubing• plastic tubing• ferruleCompression Nut(1/4”) (Assembled)Ferrule(Not supplied)Plastic Tubing(Assembled)CompressionFitting (Assembled)BulbCompressionnut (B) (1/4”)(Not supplied)orCopper tubing(Not supplied)Plastic tubing (B)(Not supplied)Household water supply lineRefrigerator1. Connect the household water line to theassembled compression fitting.- If you are using copper tubing, slip thecompression nut ( B ) (not included) and ferrule(not included) on copper tubing (not included)as shown.- If you are using plastic tubing ( B ), insert themolded end (Bulb) of the plastic tubing ( B ) intothe compression fitting.Do not use without the molded end (Bulb)of the plastic tubing ( B ).2. Tighten the compression nut ( B ) onto thecompression fitting.Do not over-tighten the compression nut ( B ).3. Turn water on and check for any leakage.Only connect the water line to a drinkablewater source.If you have to repair or disassemble thewater line, cut off 1/4“ of the plastic tubingto make sure you get a snug, leak-freeconnection.CAUTIONDA68-02500B-13.indb 13 13. 12. 4. �� 7:12