English - 14BEFORE USING ICEMAKER• Remove- Hold the handle as shown in Figure1.- Slightly pull up the bottom part.- Take out the ice bucket slowly.Figure 1• Install- Assemble the icemaker in the reverse order ofdisassembly.- Push the bucket in firmly until you hear aclicking sound.- If the bucket does not fit into its place, turn thegear handle on its back by 90 degrees andreinstall it again as shown in Figure 2.Figure 2• Before calling service- Any sounds you hear when the ice makerdumps ice into the bucket are part of normaloperation.- If you don’t dispense ice for a long periodof time, the ice may form clumps in theice bucket. If ice clumps form, remove theremaining ice and empty the bucket.- When ice does not come out, check for icestuck in the chute and remove it.Ice Chute• When Ice Off blinks on the displaypanel, reinsert the bucket and/or makesure it’s installed properly.• When the door is open, the Ice and waterdispenser do not work.• If you close the door hard, it may cause waterspilling over the ice maker.• To prevent dropping the ice bucket, use bothhands when removing it.• To prevent injury, be sure to clean up any ice orwater that may have dropped on the floor.• Do not let the children hang on the icedispenser or on the bucket.They may get hurt.• Be sure not to put your hand or any object intothe ice chute.It may cause personal injury or damagemechanical parts.CAUTIONDA68-02500B-13.indb 14 13. 12. 4. �� 7:12