22 2A. Phone BasicsDialing OptionsWhen you enter numbers in standby mode, you willsee a variety of dialing options displayed as softkeys onthe phone’s screen.To send a message to the number, press SENDMESSAGE (left softkey).– or –To initiate an option, press OPTIONS (right softkey), thenpress the corresponding softkey. Contact Details: Displays the details for a Contact if theentered number matches a previously created entry. Save: Enter a seven-digit or ten-digit number (phonenumber and area code) and press OPTIONS (rightsoftkey) > Save to save the phone number in yourContacts. (See “Saving a Phone Number” onpage 26.) Hard Pause: Enter digits and then use this feature toenter a hard pause within a number string (thephone waits for your input). To continue dialing,you must press the key. (See “Dialing andSaving Phone Numbers With Pauses” on page 27.) 2-Sec Pause: Enter digits and then use this feature toenter a 2 second delay within a number string (thephone continues dialing after 2 seconds without anyadditional keys being pressed). (See “Dialing andSaving Phone Numbers With Pauses” on page 27.)Tip To speed dial a phone number from standby mode,press and hold the speed dial number. If the speeddial number is two digits, enter the first digit, and thenpress and hold the second digit. (For information onsetting up speed dial numbers, see “AssigningSpeed Dial Numbers” on page 69.) (This feature willnot work when you are roaming off the NationwideSprint Network; when roaming you must dial usingeleven digits [1 + the area code + the seven-digitphone number].)Sprint M560.book Page 22 Tuesday, March 2, 2010 3:37 PM
