English - 20( 5 ) Lighting / °C↔°F (3 sec)The Lighting button serves two purposes:- To turn the dispenser light on and off.- To switch the temperature unitsbetween ºC and ºF.1. Light FunctionTouching the Lighting button turns on theDispenser LED lamp in continuous modeso that it stays on continuously.The button also lights up.If you want the Dispenser lamp to come ononly when some one uses the dispenser,press the Lighting button to turn thecontinuous mode off.2. To switch the temperature unitsbetween ºC and ºF.Touch and hold this button for 3 secondsto select the temperature display you want.Each time you press and hold the button,the ºC and ºF temperature modes alternateand the ºC or ºF icon lights up, indicatingyour selection.( 6 )(11) Ice Maker Off / Control Lock (3 sec)The Ice Maker Off button serves twopurposes:- To turn the Ice maker on and off.- To turn the Control Lock Function onand off.1. Ice Off FunctionIf you don’t want to make more ice, pressthe Ice Maker Off button.The icon lights and the Ice Maker stopsmaking ice.If the ice maker function is ON, and thewater Line is not connected, there will be awater valve noise from the back of the unit.Press the Ice Maker Off (Control Lock(3 sec)) button for less than 3 seconds untilthe Ice Off Indicator ( ) illuminates.2. Control Lock FunctionTouch and hold this button for 3 secondsto lock the display and the dispenserbuttons so the buttons cannot be used.When Control Lock is on, the refrigeratordoes not dispense ice or water, even if theDispenser Lever is pressed.The Control Lock icon lights to indicateyou’ve activated the Control Lock function.Touch and hold the button 3 seconds tounlock.( 7 ) WaterTouch this button to dispense water.This mode cannot be used with the IceType mode simultaneously.Water mode shuts off when you touch theCubed / Crushed Ice button.DA68-03029A-01.indb 20 2014. 3. 19. �� 9:24