108 2F. Voice ServicesText-to-SpeechAllows the device to provide a verbal readout ofonscreen data such as messages and incoming callerinformation (based on Caller ID).Text-to-Speech Settings1. Press > and tap >Voice input & output > Text-to-speech settings.2. Configure the available options to alter the settingsassociated with this feature: Listen to an example plays a short example ofwhat the text-to-speech feature will sound like onyour device when activated. Always use my settings accepts the overriding ofapplication settings with those configured withinthis text-to-speech settings screen. If enabled, andavailable as a feature, your device will default tousing the text-to-speech feature. Default Engine sets the speech synthesis engineto be used for spoken text. Install voice data confirms the installation ofnecessary data required for voice synthesis. Speech rate adjust the rate at which onscreen textis spoken by the device. Choose from: Very slow,Slow, Normal, Fast, and Very fast. Language assigns the language used by theverbal readout. Choose fromEnglish (United States) or Spanish (Spain). Pico TTS assigns the TTS settings. These settingsmust be obtained from the Android Market.3. Press to return to the previous screen.Important: Before initial use, activate the Install data functionto properly activate and use thetext-to-speech feature.M580.book Page 108 Tuesday, January 17, 2012 9:48 AM
