2A. Device Basics 43Phone Basics Mute to mute the microphone during an active call.Tap again to unmute the microphone. Speaker to route the device’s audio through thespeaker (On) or through the earpiece (Off). Bluetooth to route the device’s audio through aconnected Bluetooth headset (On) or through thespeaker (Off). (See “2I. Bluetooth” on page 122.) When the call is routed to a Bluetooth headset,the current call area shows the Bluetooth callicon ( ).● To route the current call back to the device,tap Headset to temporarily use the device. TapBluetooth again to route the call back to theconnected Bluetooth headset. When Bluetooth or the Bluetooth headset isturned off, the call is routed through either theearpiece or speaker and shows ( ).Touch and drag Dialpad (l ) up to use theonscreen dialpad to enter additional numbers, forexample, an extension or access code. For example: When you call your bank’s 800number, use your dialpad to enter your accountnumber and PIN.End-of-Call Options1. After you receive a call from or make a call to aphone number that is not in your Contacts, locatethe number in your Call log list.2. Tap the number to view options, or tap to callback the entry.Additional Calling OptionsTo obtain additional options such as phone numberand the duration of the call, you must access the CallLog screen. See “2C. Call Log” on page 78.1. Press and then tap > .Note: If Mute is activated, the speaker mode is deactivated.WARNING: Because of higher volume levels, do not placethe device near your ear during speakerphoneuse.Note: The Headset button is activated to show the current callis routed to the connected Bluetooth headset.Call logCall logM580.book Page 43 Tuesday, January 17, 2012 9:48 AM
