56 2B. Settings3. Touch and drag the onscreen slider, adjust thevolume level, and tap OK.VibrateTo set your device to vibrate for incoming calls and silentfor notifications: Press the volume button down in standby modeuntil you see on the screen.To set your device to always vibrate for incoming calls:1. Press > and tap > Soundsettings > Vibrate.2. Tap a feature to enable it. A green light indicatesthe feature is enabled: Always: your device vibrates for all incoming callsand notifications. Never: your device uses sound only for allnotifications and alerts. Only in silent mode: your device vibrates fornotifications and alerts when Silent mode isactive. Only when not in Silent mode: your device onlyvibrates for notifications and alerts when Silentmode is not active.To set your device to vibrate while using the dialpad:1. Press > and tap > Soundsettings.2. Tap Haptic feedback. (If you have already checkedthe option, tapping it again deselects the option.)Silent ModeThe Silent mode option allows you to mute all soundswithout turning your device off (except for Mediavolume).To set your device to Silent mode:1. Press > and tap > Soundsettings.Note: By default, the Use incoming call volume fornotifications field is active, in this case, theNotification slider is not accessible until it is disabled.Tip: You can adjust the ringer volume in standby mode (orthe earpiece volume during a call) by pressing thevolume button up or down.M580.book Page 56 Tuesday, January 17, 2012 9:48 AM
