Samsung SCC-C4207P Owner's Instructions Manual

Also see for SCC-C4207: Owner's instructions Owner's instructions

Contents

30E29- C-LEVEL: It is used to set the levels for the Burst signaland the entire colour signal of the video signal.- OTHER SETIn OTHER SET menu, you can adjust LANGUAGE, CTRLTYPE, ZOOM SPEED, D-ZOON, RS-485, SYSTEMINFO..., and V-SYNC function, DISPLAY ZOOM etc. Whenyou press [ENTER] key from OTHER SET menu, theOTHER SET additional menu screen appear.- LANGUAGE : Selects English/Russian/Polish OSD menu.- CTRL TYPE : By inputting the wire remote port, you mayset up the mode, A, B, C, or D.- ZOOM SPEED : Use [Left, Right] key in the ZOOM SPEEDmenu to set the speed as follows.- ZOOM SPEED 1 : About 17Sec. from X 1 to X 32(Slowest)- ZOOM SPEED 2 : About 10Sec. from X 1 to X 32(Slow)- ZOOM SPEED 3 : About 6Sec. from X 1 to X 32(Fast)- ZOOM SPEED 4 : About 3Sec. from X 1 to X 32(Fastest)- D-ZOOM : Sets up the Digital Zoom magnification ratio upto x10.- RS-485 : Sets up RS-485 Communication Protocol,Address, and Baud Rate.CodeABCDTele-6V-6V+6V+6VWide+6V+6V-6V-6VFar+6V-6V+6V-6VNear-6V+6V-6V+6V❖ V-SYNC menu is only available in SCC-C4307.❖ When a DC power is supplied, V-SYNC menu will be displayedas --- and you cannot make any settings.(OTHER SET)LANGUAGE ENGLISHCTRL TYPE AZOOM SPEED 4D-ZOOM OFFRS-485 ...SYSTEM INFO ...V-SYNC INTDISPLAY ZOOM OFFRET(SPECIAL)POSI/NEGA +DIS OFFREVERSE OFFDETAIL (0)--I-Y-LEVEL (0)I--------C-LEVEL (0)I--------OTHER SET ...RET- SYSTEM INFO : You can confirm settings related to theRS-485 communication, product serial number, and thesoftware version.- V-SYNC : INT shall be selected to use internalsynchronization. LINE... is used to synchronize severalcamera phases for the multi camera operation by using anexternal signal(AC signal). As there may be a slight deviationbetween sets, adjusts PHASE to overcome this handicap.When you use AC power source, V-SYNC is available.Select LINE... and press [ENTER] and the PHASE controlsubmenu will appear. The PHASE control ranges from -106Hto +106H as for NTSC and from -138H to +138H as for PAL.Press theENTERbutton.(OTHER SET)LANGUAGE ENGLISHCTRL TYPE AZOOM SPEED 4D-ZOOM OFFRS-485 ...SYSTEM INFO ...V-STNC INTRET(RS-485)PROTOCOL SAMSUNGBAUD RATE 9600ADDRESS 0RETPress theENTERbutton.(OTHER SET)LANGUAGE ENGLISHCTRL TYPE AZOOM SPEED 4D-ZOOM OFFRS-485 ...SYSTEM INFO ...V-STNC INTRETPress theENTERbutton.(SPECIAL)CTRL TYPE APOSI/NEGA +ZOOM SPEED 1DIS OFFD-ZOOM OFFREVERSE OFFRS-485 ...V-SYNC LINE...LANGUAGE ENGLISHDETAIL (0)--I-RET(LINE LOCK)PHASE (000)----I----RET(SYSTEM INFO)ROM VER 1.000EEP VER 1.000PROTOCOL SAMSUNGADDRESS 0TYPE RS-485, HALFBAUD RATE 9600SERIAL NO 000000000000000RET