Samsung SCC-C6405(P) Owner's Instructions Manual

Also see for SCC-C6405: Owner's instructions Owner's instructions

3-5 3-6ECOLOR/BWIn the COLOR/BW menu, you can switch ON or OFF the IR (infrared) Filter.In a poor illumination environment, the IR filter is turned off in the BW mode the itssensitivity increases as high as a black and white camera. On the other hand, theIR filter is turned on and the sensitivity decreases in the COLOR mode.COLOR : The IR Filter is ON and the screen is normal.BW : The IR Filter is OFF and the screen is black and white.(Sensitivity to low light is increased to a level comparable to a blackand white camera.)Select BW and press [ENTER] and the additional menu to selectBURST ON/OFF will appear.AUTO : Select to automatically switch between the COLOR mode and BWmode depending on the amount of light. In low light conditions, theIR Filter is turned OFF and the sensitivity to low light is increasedby switching to the BW mode, but in bright light conditions, the IRFilter is turned ON and the sensitivity is decreased by switching tothe COLOR mode.Select AUTO and press [ENTER] and the additional menu to selectBW LEVEL and DURATION will appear.- BURST ON : The color burst signal is output together with black and whitecomposite video signal.- BURST OFF : The color burst signal is not output.- LEVEL : You can set the brightness level that changes from COLOR modeto BW mode in 3 steps : LOW, MEDIUM, and HIGH.- DURATION : Set the HOLDING time for switching between COLOR and BWmode depending the changes in the amount of light. You can setthe HOLDING time to 10sec (S), 30sec, 60sec, or 300sec( L).➜Press[Enter](CAMERA SET)CAMERA ID OFFV-SYNC INTCOLOR/BW AUTO...MOTION DET OFFZOOM SPEED 0DIGITAL ZOOM 0EXIT QUITIn AUTO mode, AGC will operates in high speed mode, and you cannotchange it manually, as it is indicated by "---".Caution : If you use an infrared light source while in AUTO mode, AUTOswitching malfunction and camera AF malfunction may occur.(AUTO)BURST ONLEVEL LOWDURATION S --|---- LRET➜Press[Enter](CAMERA SET)CAMERA ID OFFV-SYNC LINE...COLOR/BW COLORMOTION DET OFFZOOM SPEED 3DIGITAL ZOOM OFFEXIT QUIT➜Press[Enter]* " ... " Means there are Sub Menus.(CAMERA SET)CAMERA ID ON...V-SYNC INTCOLOR/BW COLORMOTION DET OFFZOOM SPEED 3DIGITAL ZOOM OFFEXIT QUIT(CAMERA ID)A B C D E F G H I J K LM N O PQ R S T U V W XY Z 0 1 2 3 4 5 6 7 8 9: ! - + ✽ ( ) /SP ï î SPLOCATION...RETSCC-C6405P........V-SYNCIn the V-SYNC menu, vertical synchronization can be selected. Thevertical synchronization signal supported by the SCC-C6405(P) is the INTmode made by clock inside the SCC-C6405(P) and LINE mode adjustingvertical synchronization to the exterior power frequency.Select LINE and press [Enter]. You will see the LINE LOCK submenuwhere you can adjust the phase of the LINE LOCK.You can use the PHASE menu of the LINE LOCK submenu to assign asmuch PHASE as you want.(LL-PHASE)PHASE (000)---- I ----RET