Samsung SCC-C6405(P) Owner's Instructions Manual

Also see for SCC-C6405: Owner's instructions Owner's instructions

3-20EREVERSEThe REVERSE function applies PRIVACY MASK to the other area thanset as a privacy zone. ON/OFF is available.ZONE DIR SET/ZONE AREA SETThis function indicates the ID or direction depending on the set valuewhen PAN of SCC-C6405(P) is located in a specific area. If set to AREA,it indicates the ID of the selected area and if set to N(NORTH), NE(NORTH-EAST), E(EAST), SE(SOUTH-EAST), S(SOUTH), SW(SOUTH-WEST), W(WEST),NW(NORTH-WEST.EXIT"QUIT" : Does not save the selected information and returns to a highermenu."SAVE" : Do saves the selected information and returns to a higher menu."DEL" : Deletes the selected information and restores the DEFAULT.Then returns to a higher menu.PRIVACY ZONE SET 0SET ZONE AREA ON...SET ZOOM ...REVERSE ONEXIT QUITSET ZOOMPress [ENTER] at the “SET ZOOM...” position to enter the ZOOM setupscreen. After ZOOM setup, the PRIVACY ZONE function will be in actiononly at the higher magnification than the Zoom magnificationas set.➜Press[Enter]SET ZOOMPRIVACY ZONE SET 0SET ZONE AREA ON...SET ZOOM ...REVERSE OFFEXIT QUIT3-19➜After P/T/Zcontrol, press[ENTER]➜After P/T/Zcontrol, press[ENTER]PRIVACY ZONE P/T 3PRIVACY ZONE P/T 2PRIVACY ZONE P/T 4SET ZONE AREAPress [ENTER] at the “SET ZONE AREA...” position to enter thePRIVACY ZONE setup screen. Control PAN/TILT/ZOOM to select 4apexes of the PRIVACY ZONE area and the rectangular PRIVACYZONE area will be completed.➜Press[Enter]➜After P/T/Zcontrol, press[ENTER]PRIVACY ZONE P/T 1PRIVACY ZONE SET 0SET ZONE AREA ON...SET ZOOM OFFREVERSE OFFEXIT QUIT❈ For the safer privacy protection, select about 10 % more than theactual size to hide when you set up the PRIVACY ZONE area.❈ 4 points of PRIVACY ZONE area are in the middle of the screen.Therefore, when the tilt is positioned at upside limit(0° or 180°),PRIVACY ZONE cannot be set in the area which is displayedabove center.❈ If the points becomes X shape, it means PRIVACY ZONE cannotbe set due to the size limitation.