Samsung SCC-C6405(P) Owner's Instructions Manual

Also see for SCC-C6405: Owner's instructions Owner's instructions

3-24EDIRECTIONThis sets up the movement direction of the START to END location(PAN location standard)"RIGHT " : "LEFT " :ENDLESSThis is a 360-degree rotation function that stops for the DWELL TIME only in theSTART and END positions without running between the START and ENDpositions. It can be set to "ON" or "OFF".SPEEDThis is a setting function for movement speed setup. It can be set fromSTEP1 to STEP64.DWELL TIMEThis is a function for setting up the time to stay in the START to END position.PATTERNThis is a replay function so that the MANUAL functions such as PAN, TILT,ZOOM, and FOCUS are played for 2 minutes.3-23AUTO PANAfter selecting the locations of two points (PAN/TILT) of START and END,it loops continuously in the set up SPEED. The number of AUTO PAN isup to 4.5. AUTO SETThe AUTO SET menu includes AUTO PAN, PATTERN, and SCAN and it isable to set up the AUTO PLAY motion.➜Press[Enter]* * MAIN MENU * *CAMERA SET...VIDEO SET...PRESET...ZONE SET...AUTO SET...ALARM SET...OTHER SET...SYSTEM INFO...(AUTO SET)AUTO PAN 1...PATTERN 1...SCAN 1...AUTO PLAY ...RET➜Press[Enter]AUTO PAN 1START SET ...END SET ...DIRECTION RIGHTENDLESS ONSPEED 32DWELL TIME 3SEXIT QUITSTART SETFrom "START SET...", get into the START SET setup screen by pressing[ENTER].After selecting the locations of PAN/TILT location, press [ENTER] again toreturn to higher menu.END SETFrom "END SET...", get into the END SET setup screen by pressing[ENTER]. Adjust PAN/TILT location and press [ENTER] to return to ahigher menu.❈ When the PATTERN is saved/executed, the PAN/TILT is operated withPROPORTIONAL ON, TURBO OFF.❈ Two minutes PATTERN function is supported only by the ALARM VER1.100 over. If the SSC-1000 or SSC-2000 is used whenuploading/downloading the menu setup, reset the PATTERN because itmay be different with the first setting.