Wireless network setup1602. Using a Network-Connected MachineMachines with a display screenConnecting in PBC mode1 Press and hold the (WPS) button on the control panel for more than2 seconds.The machine starts waiting for up to two minutes until you press the WPS(PBC) button on the access point (or wireless router).2 Press the WPS (PBC) button on the access point (or wireless router).The messages are displayed on the display screen in the order below:a Connecting: The machine is connecting to the access point (orwireless router).b Connected: When the machine is successfully connected to thewireless network, the WPS LED light stays on.c AP SSID: After completing the wireless network connection process,the AP’s SSID information appears on the display.Connecting in PIN mode1 Press and hold the (WPS) button on the control panel for more than2 seconds.2 The eight-digit PIN appears on the display.You need to enter the eight-digit PIN within two minutes on thecomputer that is connected to the access point (or wireless router).The messages are displayed on the display screen in the order below:a Connecting: The machine is connecting to the wireless network.b Connected: When the machine is successfully connected to thewireless network, the WPS LED light stays on.c SSID Type: After completing the wireless network connectionprocess, the AP’s SSID information is displayed on the LCD display.