Printing features2404. Special FeaturesConfiguring Printer PropertiesUsing the Printer Properties window provided by the Printers configuration,you can change the various properties for your machine as a printer.1 Open the Unified Driver Configurator.If necessary, switch to Printers configuration.2 Select your machine on the available printers list and click Properties.3 The Printer Properties window appears.The following five tabs display at the top of the window:• General: Allows you to change the printer location and name. Thename entered in this tab displays on the printer list in Printersconfiguration.• Connection: Allows you to view or select another port. If you changethe machine port from USB to parallel or vice versa while in use, youmust re-configure the machine port in this tab.• Driver: Allows you to view or select another machine driver. Byclicking Options, you can set the default device options.• Jobs: Shows the list of print jobs. Click Cancel job to cancel theselected job and select the Show completed jobs check box to seeprevious jobs on the job list.• Classes: Shows the class that your machine is in. Click Add to Classto add your machine to a specific class or click Remove from Classto remove the machine from the selected class.4 Click OK to apply the changes and close the Printer Properties window.18Unix printingSome features may not be available depending on models or options. Itmeans that the features are not supported (see "Features by models" onpage 7).Proceeding the print jobAfter installing the printer, choose any of the image, text, PS or HPGL files toprint.1 Execute “printui ” command.For example, if you are printing “document1”printui document1This will open the UNIX Printer Driver Print Job Manager in which theuser can select various print options.2 Select a printer that has been already added.3 Select the printing options from the window such as Page Selection.4 Select how many copies are needed in Number of Copies.
