Wireless network setup1752. Using a Network-Connected Machine14 The window shows the wireless network settings and check if settingsare right. Click Next.• For the DHCP methodIf the IP address assignment method is DHCP, check if DHCP is shownin the window. If it shows Static, click Change TCP/IP to change theassignment method to DHCP.• For the Static methodIf the IP address assignment method is Static, check if Static is shownin the window. If it shows DHCP, click Change TCP/IP to enter the IPaddress and other network configuration values for the machine.Before entering the IP address for the machine, you must know thecomputer’s network configuration information. If the computer isset to DHCP, you must contact the network administrator to get thestatic IP address.For example:If the computer’s network information is shown as follows:- IP address: 169.254.133.42- Subnet Mask: 255.255.0.0Then, the machine’s network information should be as shownbelow:- IP address: 169.254.133.43- Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)- Gateway: 169.254.133.115 When the window that tells you that the network cable connection isconfirmed appears, disconnect the network cable and click Next.If the network cable is connected, it may have trouble finding themachine when configuring the wireless network.16 Wireless network setting is completed. To print from a Wi-Fi Directsupported mobile device, set the Wi-Fi Direct Option (see "Setting up Wi-Fi Direct" on page 183).Wi-Fi Direct Option:• Wi-Fi Direct Option appears on the screen only if your printer supportsthis feature.• Can start to build Wi-Fi Direct by using Samsung Easy Printer Manager(see "Setting up Wi-Fi Direct" on page 183).
