Wireless network setup1632. Using a Network-Connected Machine4 Select the Wireless Setting and Installation option.• Install Now: If you have set the wireless network, click this button toinstall the machine’s driver to use the wireless network machine. Ifyou have not set the wireless network, click Wireless Setting andInstallation button to set the wireless network before you click thisbutton.• Wireless Setting and Installation: Configure the wireless networksettings of your machine’s with a USB cable then install the machinedriver. This only for users who have not set up the wirelessconnection before.5 Read the License Agreement, and select I accept the terms of theLicense Agreement. Then, click Next.6 The software searches the wireless network.If the software has failed to search the network, check if the USB cable isconnected properly between the computer and machine, and follow theinstruction in the window.7 After searching the wireless networks, a list of wireless networks yourmachine has searched appears.If you want to use the Samsung default ad hoc setting, select the lastwireless network on the list, Network Name(SSID) is portthru andSignal is Printer Self Network.Then, click Next.If you want to use other ad hoc settings, select another wireless networkfrom the list.If you want to change ad hoc settings click the Advanced Setting button.• Enter the wireless Network Name: Enter the SSID name you want (SSIDis case-sensitive).• Operation Mode: Select ad hoc.• Channel: Select the channel. (Auto Setting or 2412 MHz to 2467 MHz).• Authentication: Select an authentication type.Open System: Authentication is not used, and encryption may or maynot be used, depending on the need for data security.Shared Key: Authentication is used. A device that has a proper WEP keycan access the network.• Encryption: Select the encryption (None, WEP64, WEP128).• Network Key: Enter the encryption network key value.
