Basic printing592. Menu overview and basic setupSetting Eco mode on the control panel• The settings set from the machine’s driver override the settings on thecontrol panel.• Accessing menus may differ from model to model (see "Accessing themenu" on page 31).• It may be necessary to press OK to navigate to lower-level menus forsome models.1 Select (Menu) > System Setup > Machine Setup > Eco Settings onthe control panel.2 Select the option you want and press OK.• Default Mode: Select this to turn on or off the eco mode. (Duplex(long edge)/Toner save/2-up/Skip blank pages)- Off: Set the eco mode off.- On: Set the eco mode on.If you set the eco mode on with a password from the SyncThru™ WebService (Settings tab > Machine Settings > System > Eco > Settings), theOn force message appears. You have to enter the password to change theeco mode status.• Change Template: Follow the settings from Syncthru™ Web Service.Before you select this item, you must set the eco function inSyncThru™ Web Service> Settings tab > Machine Settings >System > Eco > Settings.3 Press OK to save the selection.Setting eco mode on the driverOpen the Eco tab to set Eco mode. When you see the eco image ( ), thatmeans the eco mode is currently enabled.Eco options• Printer Default: Follows the settings from the machine's control panel.• None: Disables Eco mode.• Eco Printing: Enables eco mode. Activate the various Eco items you want touse.• Password: If the administrator has enabled Eco mode, you have toenter the password to change the status.
