Printing quality problems2826. TroubleshootingVertical repetitive defects If marks repeatedly appear on the printed side of the page at even intervals:• The toner cartridge may be damaged. If you still have the same problem, remove the toner cartridge and, install a new one (see"Replacing the toner cartridge" on page 75).• Parts of the machine may have toner on them. If the defects occur on the back of the page, the problem will likely correct itself aftera few more pages.• The fusing assembly may be damaged. Contact a service representative.Background scatter Background scatter results from bits of toner randomly distributed on the printed page.• The paper may be too damp. Try printing with a different batch of paper. Do not open packages of paper until necessary so thatthe paper does not absorb too much moisture.• If background scatter occurs on an envelope, change the printing layout to avoid printing over areas that have overlapping seamson the reverse side. Printing on seams can cause problems.Or select Thick from the Printing Preferences window (see "Opening printing preferences" on page 57).• If background scatter covers the entire surface area of a printed page, adjust the print resolution through your software applicationor in Printing Preferences (see "Opening printing preferences" on page 57). Ensure the correct paper type is selected. For example:If Thicker Paper is selected, but Plain Paper actually used, an overcharging can occur causing this copy quality problem.• If you are using a new toner cartridge, redistribute the toner first (see "Redistributing toner" on page 74).Toner particles are around boldcharacters or picturesThe toner might not adhere properly to this type of paper.• Change the printer option and try again. Go to Printing Preferences, click the Paper tab, and set the paper type to Recycled (see"Opening printing preferences" on page 57).• Ensure the correct paper type is selected. For example: If Thicker Paper is selected, but Plain Paper actually used, an overchargingcan occur causing this copy quality problem.Condition Suggested solutionsA
