4.30 Stand-alone Fax6. Press a one-touch button where the fax number you wish to include inthe group is stored.Or,Enter a 2-digit speed dial location where the fax number you wish toinclude in the group is stored.7. Press Start/Enter. Repeat step 6 to enter additional numbers intothe selected group.8. Press Stop when you have entered all the desired destinations.The display asks you to enter a name.9. To assign a name to the group, enter the desired name. See page4.17 for entering letters.Or,If you do not want to assign a name, skip this procedure.10. Press Start/Enter. The display asks you to select a one-touchnumber for another group dial.11. To continue storing, press the wanted one-touch button and repeatsteps 4 through 10.12. To stop storing, press Stop. The display returns to Standby mode.Note: You cannot include one group dial number in another group dialnumber.Sending a Fax Using Group Dialing(Multi-Address Transmission)You can use Group Dialling for the Delayed Transmission or MemoryTransmission.Follow the procedure of the desired operation (Delayed Transmission -p.4.24, Memory Transmission - p.4.26). When the display requests youto enter the remote fax number, press the one-touch button where youstored the group number. You can use only one group number for eachoperation. Continue the procedure to complete the desired operation.The machine automatically scans the document into memory and dialseach of the numbers included in the Group.
