Changing Your Settings 643. To create a new connection, touch .– or –To edit the existing AT&T MMS, touch this entry.4. Select the parameter you want to edit:• Set Name: enter a profile name.• Access Name: edit the access point name.• Auth Type: select the type of authentication used for this WAPconnection: None, Normal, or Secure.• User ID: enter the User ID required to connect to the network.• Password: enter the user password required to connect to thenetwork.• Protocol: set the connection protocol used by the WAP browser:WAP, HTTP, or Other.• Home URL: enter the URL address of the page to be used as yourhomepage.• Proxy address: MEdia Net set as the proxy server address andport.• Linger Time (Sec.): set a time period (in seconds) after which thenetwork is disconnected if there has been no new data traffic in thattime.• Advanced Settings: allows you to configure some of the IP-specificinformation: Static IP, Static DNS, Server information, and TrafficClass.– Static IP: specify if you want to manually enter an IP address. If youwant the IP address to be automatically assigned by the server, removethe check mark.– Static DNS: specify if you want to manually enter the Domain NameServer (DNS) address. If you want the address to be automaticallyassigned by the server, remove the check mark.– Traffic Class: select the traffic class.Note: The WAP settings may vary depending on the service provider.5. Touch to store these new settings.IMS SettingsIMS is the method used to connect to the server in order set upthe Video Share option.1. From Idle mode, touch ➔ Settings ➔ Connectivity ➔Network Profiles.2. Touch one of these options:• IMS Service allows you to set the IMS service to On or Off.Touch to store the new setting.Important!: If you reset the IMS Service to Off, you will not be able to use theVideo Share option.Note: Having the IMS Service set Off may save minutes and memory.CreateSaveSave
