Access codes180PIN2The PIN2 (4 to 8 digits), supplied with some SIMcards, is required to access specific functions, suchas setting the maximum cost of a call. Thesefunctions are available if supported by your SIMcard.If you enter an incorrect PIN2 three times insuccession, the code is disabled and you cannotaccess the functions until you re-enable it byentering the PUK2.To change the PIN2, see page 172 (Menu 9.6.8).PUK2The 8-digit PUK2 (PIN Unblocking Key 2), suppliedwith some SIM cards, is required to change adisabled PIN2. If you lose the code, contact yourservice provider.To re-enable your PIN2:1. Enter the PUK2 and press the key or OK softkey.2. Enter a new PIN2 of your choice and press thekey or OK soft key.3. When the Confirm PIN2 message displays,enter the same code again and press the keyor OK soft key.If you enter an incorrect PUK2 ten times insuccession, you will not be able to access thefunctions requiring the PIN2. Contact your serviceprovider for a new card.Access codes181Barring passwordA 4-digit barring password is required when you usethe Call Barring function. You can obtain thepassword from your service provider when yousubscribe to this function.You can change this password in the Call barringmenu (Menu 3.2). See page 95 for further details.