24 General Functions 25General FunctionsA icon is continuously displayed in the upper line of theLCD window. The icon shows the level of your battery.The more bars you see, the more power you have left.When the battery is weak and a few minutes of talk timeremain, you will hear a warning tone and the icon blinks.When the battery becomes too weak for the phone to operate,the handset will automatically turn off. Place the handset onthe base unit to charge the handset battery.Battery Level IndicatorFlat FullTo Erase All Numbers In Redial Memory1. Press the Redials soft key in the Standby mode.2. Press the All Erase soft key. The display prompts you toconfirm the setting.3. Press the Yes soft key. You hear a beep and the phonereturns to the Standby mode after clearing the redialmemory.H S ( 1 ) B S ( 1 )S A M S U N GDuring calls, pressing the or keys on the side of thephone affects the ear piece volume.You can adjust the volume from level 1 to 5, and it is preset tolevel 3. The voice volume is displayed as bars in the LCDwindow. The more bars you see, the louder the volume is.Adjusting Voice VolumeV o i c e V o l u m e[ _ ]F l a s h R e d i a l sEar piece volume indicatorOut of Range IndicatorYour phone indicates the received signal strength through thestrength icon. The more bars you see, the stronger the signalis. If the handset is too far from the base unit and the handsetcannot properly engage the telephone line, the icon blinksin the LCD window.If you move out of range during a call, the telephone linemight be disconnected and the handset returns to the Standbymode. Check if the icon blinks in the LCD window. If so, movethe handset closer to the base unit.SignalStrength Icon H S ( 1 ) B S ( 1 )S A M S U N G