Samsung SP-R6100 User Manual

Also see for SP-R6100: User manual Service manual

55System54 System9. Enter 9234, the Authentication Code, which is preset atfactory, then press the OK soft key.10. When the registration is properly completed, the handsetreturns to the Standby mode and displays the basenumber and the handset number.11.Unplug the power cord and then plug it in again.Notes:• If you have registered the handset to several bases, and thebase number you select at step 7 is already used foranother base, you will be asked to confirm that you want tooverwrite. If you press the Yes soft key, the old informationis cleared and the base number will be used for your newlyselected base. To keep old information, press and hold thekey to cancel the setting, then start over again with adifferent base number.• The time limit for registering a handset to a base is 60seconds. The registration will be automatically cancelledwhen this time has elapsed.• If you fail to register the handset, the handset displaysFail to Register.The handset supplied with the base unit is already registeredas handset 1. Each additional handset you purchase must beregistered to the base unit.1. Press and hold the Paging key on the base for more than 3seconds. The light is blinking.2. Press the Menu soft key on the handset.3. Press the soft key repeatedly until System appears,then press the Select soft key. You are asked to enter thePIN code. It is preset to 0000.4. Enter the PIN code, then press the OK soft key.5. Press the soft key repeatedly until Registrationappears.6. Press the Select soft key. The available bases aredisplayed. The selected base to which your handset isregistered has a check mark on its right side.7. Select a base by using the soft key, then press theSelect soft key. Please wait appears for a short time,then the LCD window displays the ID of the base unit.8. Press the OK soft key.Registering a New Handset (Menu 6-2)