Samsung SP-R6100 User Manual

Also see for SP-R6100: User manual Service manual

59System58 System(Available only when you have more than one handset)You can transfer a call from one handset to another.1. During a telephone conversation, press key. Yourcaller will be put on hold and will hear music.INTERCOM - displays and the cursor blinks.2. Enter the number (1 through 6) of the handset to which youwant to transfer the call.3. The paged handset rings. To answer the call from you, thepaged handset should open the flip cover or press eitherkey or key.4. You can speak with the handset (Intercom).5. To transfer the external call to the paged handset, close theflip or press key.To cancel the call transfer and talk with the outside partyagain, press key.Call Transfer Between Handsets1. In the Standby mode, press the Menu soft key.2. Press the soft key repeatedly until System appears,then press the Select soft key.3. Enter the PIN code, then press the OK soft key.4. Press the soft key repeatedly until Remove Handsetappears, then press the Select soft key.5. The selected base number to which your handset is current-ly registered appears. Press the Yes soft key.6. When the handset is properly removed, Fail to Register isdisplayed. Now, you cannot use the handset with the baseunit unless you register the handset back to it.Note: If the handset is registered to more than one base unit,and you want to use the handset with other base units,you have to choose one of the other bases available.Refer to ‘Selecting Base Manually’ on page 64.Removing a Handset (Menu 6-3)