Samsung SP-R6100 User Manual

Also see for SP-R6100: User manual Service manual

61System60 SystemChanging PIN(Personal Identification Number) (Menu 6-4)The PIN is required when you access System menus. The PINis preset to ‘0000’ at factory. You can change the PIN code.1. In the Standby mode, press the Menu soft key.2. Press the soft key repeatedly until System appears,then press the Select soft key.3. Enter the PIN code, then press the OK soft key.4. Press the soft key repeatedly until Change PINappears, then press the Select soft key.5. New PIN [ ] is displayed. Enter a new PIN code, thenpress the OK soft key. The LCD window does not displaythe PIN code you entered in order to maintain secrecy.Note: It must be 4 digits. If you make a mistake, you cancorrect the number by using the key.6. Enter the new PIN code again to confirm the number, thenpress the OK soft key.Notes:• If you enter a different number from the new code, thephone sounds an error beep, and returns to the previousscreen.• If you change the PIN code and then forget it, you will haveto contact your local service center.• If you want to exit from the Change PIN mode while chang-ing PIN, press the Exit soft key.If you reset the handset, all numbers stored in your phonememory are cleared, and all the user-selectable featuresreturn to the manufacturer’s default status as shown below:• Redials/Received Calls/Phonebook : All Erase• Ring Tone: Tone 1 • Ring Volume: Level 3• Ring Delay: OFF • Call Time: ON• Base Number: ON • Active Flip: OFF• PIN code: 0000 • Auto Find: OFF• No number barred• Greeting Message: SAMSUNG• Key Volume : Level 1 • Voice Volume : Level 3• Unique Ring Tone: OFFNote: The Dial type will not change even after resetting thehandset.1. In the Standby mode, press the Menu soft key.2. Press the soft key repeatedly until System appears,then press the Select soft key.3. Enter the PIN code, then press the OK soft key.4. Press the soft key repeatedly until Reset Handsetappears, then press the Select soft key.5. When you are asked to confirm that you want to reset thehandset, press the Yes soft key to confirm.Reset Handset (Menu 6-5)

/ 34

Related manuals for Samsung SP-R6100