Samsung SP42W4 Owner's Instructions Manual

Also see for SP-42W4: Owner's instructions Owner's instructions Control Panel Manual Owner's instructions Owner's instructions

Contents

17If the color appears spread out or “smeared” on the screen, theconvergence probably needs alignment. Be sure to use the remotecontrol for the convergence adjustments. (The ConvergenceAdjustment can not be made by using the control buttons on thefront panel.)1 Press the MENU button.Result: The main menu is displayed.2 Press the or button to select Function.Result: The options available in the Function group aredisplayed.3 Press the button.4 Press the or button to select Convergence. Press thebutton.Result: The options available in the Convergence group aredisplayed with Red is selected.5 Press the button again.Result: A crosshair pattern is appeared.6 Adjust convergence by using your remote control. Use the //➛/❿ buttons to all directions for select theposition. Press the “0” button to select red or blue convergence. To move the line so that it is superimposed on the horizontalor vertical center-line, use the volume up/down (VOL +/-) andchannel up/down (P / ) buttons (i.e., make a signalhorizontal or vertical line that is as white as possible). Press the MENU button to exit.You can adjust convergence automatically for the optimum in thefactory.7 Select Perfect Focus in the Function group, then press thebutton.Result: Perform Perfect Focus in the following sequence:green red blue.After the cursor flickers for one second, the perfectfocus feature ends.➣ You can also adjust simply by pressing the Perfect Focusbutton.➣ When the size of the sub picture is selected to the “12 PIP”or “3 PIP” mode, the Perfect Focus feature does not work.Adjusting ConvergenceENGPosition 0:R/BUp/Down L/R ExitPlease, use remote controlRedFunctionLanguage ❿❿Time ❿❿Convergence ❿❿Plug & Play ❿❿Childlock : OffAV Setup ❿❿Demonstration ❿❿ConvergenceManual ConvergenceRed ❿❿Blue ❿❿Perfect Focus ❿❿ConvergenceManual ConvergenceRed ❿❿Blue ❿❿Perfect Focus ❿❿Text/Mix Info. Sleep Perfect FocusPIP Scan Swap LocateONPerfect FocusProgress : 1% Exit